Products

Products from the ZX3 Zebra range

Lamp

  • High Pressure Sodium 100W/150W/250W tubular.
  • Metal Halide up to 250W tubular.

Control Gear

  • Fitted within lantern body.

Protection

  • Self-resetting thermal cut-out fitted in ballast.

Optical Unit

  • Sealsafe® comprising reflector type 1451 (left/right handed - LH/RH) bonded to a clear polycarbonate deep bowl protector. The lantern bowl incorporates two diffuser strips with alternate black/white panelling.

Canopy

  • Two-piece moulded polypropylene with hinged joint, black in colour, resistant to U.V. radiation and ageing, and protecting lantern interior to a rating of IP43. Moveable part of canopy secured in closed position by means of two stainless steel clips.

Body

  • High pressure die-cast aluminium with stoved glycerophtalic or polyester paint finish.

NEMA

  • Fitted to canopy (using watertight gasket and 4 non-corrodible screws), and wired to lantern control gear.

Installation Information

Mounting:

  • Horizontal on a 60mm, 48mm or 42mm diameter bracket arm with 100mm penetration. Locking by means of two M10 stainless steel Allen screws.
  • Vertical on a 60mm diameter column or 76mm with intermediate galvanised steel adaptor (Urbis ref: VT76/60), with 75mm penetration. Locking by means of two M10 stainless steel Allen screws.

Dimensions:

  • Height: 315mm
  • Width: 765mm
  • Length: 350mm

Weight: (Indicative maximum weights including lamp and control gear)

  • High Pressure Sodium 100W: 9.1kg
  • High Pressure Sodium 150W: 9.4kg
  • High Pressure Sodium 250W: 10.2kg

Projected Side Area:

  • 0.1637m2 (Low Profile Polycarbonate Bowl 250W)

Inclination

  • Side-entry: 0° from horizontal
  • Post-top: 5° from horizontal

Options

Design

  • Body painted to any British Standard or RAL colour
  • Canopy available in Light Grey, Mebon Green, Mid Grey. Other British Standard or RAL colours available with orders over approximately 1000 units.

Lamp & Gear

  • Remote gear

See Also

ZX3 Zebra